The Speedfeeder is a feeder for larger groups of pigs. The feed is dispensed through a unique dosing mechanism made entirely of 304 stainless steel, whereby the piglets or fattening pigs push against a flap during feeding. Because of the unique operation of the valve and the stainless steel round rod in front of the valve, the feed valve cannot be clogged with feed, which is sometimes a problem with other liquid feeders. Through the stainless steel valve, small portions of feed are dispensed. At the front of the stainless steel trough is a smart anti spillage edge and on the side anti spillage bars are welded into the trough. This means that there is virtually no feed spillage. This also ensures an optimal feed conversion that is enormously cost effective. The white transparent feed bunker of this trough has the advantage that you can quickly determine the amount of feed during your control round. One feeder has two separate dosing systems so that 2 pens can be fed separately. Various stainless steel U-profiles are available so that this feeder can be built into any plastic or concrete partition wall. The adjustment of the bin takes place by a spindle which can be set very accurately and cannot get out of its position, so the valve always doses the set amount of feed. Because the valve cannot adjust itself when the valve is pushed very hard, there will be almost no spillage of feed and the feeder is cost effective. The best feed dosage is 4 grams per movement of the valve. On this pig feeder a 1/2″ stainless steel water pipe is mounted with only 1 down pipe to which 4 stainless steel Verba drinking nipples are connected. This one half inch down pipe ensures low connection costs. The Speedfeeder feeder is standard equipped with a lid. The entire Speedfeeder is mounted with stainless steel A2 bolts M8 with lock nuts. Make sure the Speedfeeder can always give feed and therefore is not empty so the animals always have feed available and are not rationed.